Ready Mix Concrete is an important construction material used for a wide range of structural and non-structural applications. From foundations and columns to beams, slabs, lintels and flooring, concrete is required at different stages of building construction.
Choosing the right Ready Mix Concrete involves understanding the required concrete grade, application, mix characteristics and project requirements. Factory-produced concrete can also provide a controlled formulation and consistent material composition.
Precise Conchem offers SILICO CON Dry Mix Concrete in grades ranging from M20 to M100, along with specialized concrete solutions for different construction requirements.
What Is Ready Mix Concrete?
Ready Mix Concrete is concrete prepared using predetermined proportions of materials such as cement, sand, aggregates and other required components.
Instead of separately measuring and preparing every material at the construction site, factory-produced concrete is manufactured according to a defined formulation. This helps provide consistency in the concrete mix and simplifies preparation at the site.
Ready Mix Concrete can be supplied in different grades depending on the strength and application requirements of a construction project.
How Does Ready Mix Concrete Work?
The production of Ready Mix Concrete involves controlled proportioning of the materials required for the specified concrete grade.
Depending on the product, the mix can contain:
- Cement
- Graded sand
- Aggregates
- Chemical admixtures
- Performance additives
- Other specified components
For dry mix concrete, the dry ingredients are factory blended and supplied in a ready-to-use format. Water is added at the site according to the manufacturer’s recommended method before application.
Precise Conchem’s SILICO CON is a factory-produced dry mix concrete incorporating standardized binders, graded sand and aggregates.
Types of Ready Mix Concrete
Different construction requirements may call for different types of concrete products. Some commonly used Ready Mix Concrete solutions include:
Dry Mix Concrete
Dry Mix Concrete is a factory-prepared dry concrete formulation that requires the recommended quantity of water before use.
Precise Conchem’s SILICO CON Dry Mix Concrete is available from M20 to M100 grades.
Bucket Concrete
Bucket Concrete is supplied in manageable quantities and can be useful for smaller repair and construction requirements, interior work and areas where handling larger quantities may be difficult.
Backfill Concrete
Backfill concrete is used for suitable filling and construction requirements where a specified concrete mix is required.
The appropriate product should always be selected according to the application and manufacturer’s recommendations.
Understanding Ready Mix Concrete Grades
Concrete grade is an important factor when selecting Ready Mix Concrete.
Grades such as M20, M25, M30, M40 and higher represent different specified strength classes of concrete. The appropriate grade depends on the structural design and project requirements.
Precise Conchem’s SILICO CON is available in:
M20 to M100 concrete grades
This range provides options for projects with different concrete strength requirements.
The concrete grade should not be selected simply because a particular grade is commonly used. For structural applications, the required grade should be based on the approved structural design and project specifications.
Where Is Ready Mix Concrete Used?
Ready Mix Concrete can be used for various construction applications depending on the selected grade and product specifications.
Foundations
Concrete is widely used in foundation construction. The required concrete grade should be determined according to structural design, loading conditions and project specifications.
Columns
Columns are important structural components that transfer loads through the building structure. The concrete grade used for columns should follow the structural engineer’s specifications.
Beams
Ready Mix Concrete can be used for beam construction when the selected grade and product meet the project requirements.
Slabs
Concrete is commonly used for structural slabs and deck slabs. The appropriate grade should be selected according to the structural design.
Lintels and Chajjas
Concrete is also used for smaller structural elements such as lintels and chajjas.
PCC and Flooring
Certain concrete products can be used for Plain Cement Concrete, Damp Proof Courses and screed flooring, depending on the product specifications.
How to Choose the Right Ready Mix Concrete
Choosing the right Ready Mix Concrete starts with understanding the specific requirements of the project.
1. Identify the Application
First determine where the concrete will be used. Foundations, beams, columns, slabs and flooring may require different specifications.
2. Determine the Required Grade
The required concrete grade should be identified from the structural drawings and project specifications.
3. Check Product Specifications
Review the manufacturer’s technical information, including grade, water requirement, setting characteristics, packaging and recommended application.
4. Consider the Quantity Required
Estimate the required quantity before ordering to support efficient material planning and reduce unnecessary wastage.
5. Follow the Recommended Mixing Method
For dry mix concrete, follow the manufacturer’s instructions regarding water addition, mixing time and application.
Ready Mix Concrete for Different Construction Projects
Ready Mix Concrete is used across different types of construction projects.
Residential Construction
Residential projects may require concrete for foundations, columns, beams, slabs, lintels, flooring and other construction elements.
Infrastructure and Civil Engineering
Infrastructure projects may require different concrete grades and formulations depending on the structural design and project requirements.
Renovation and Repair
Certain concrete products can also be used for repair, restoration and smaller construction requirements.
Precise Conchem serves Residential Construction, Infrastructure & Civil Engineering, and Renovation & Restoration sectors.
Ready Mix Concrete vs Dry Mix Concrete
The terms Ready Mix Concrete and Dry Mix Concrete are sometimes used broadly for factory-prepared concrete solutions, but the actual product format and preparation method can differ.
Dry Mix Concrete is supplied as a dry, pre-blended formulation that is mixed with the recommended quantity of water before application.
Precise Conchem’s SILICO CON is a Dry Mix Concrete product available in M20 to M100 grades.
The product is supplied in 50 kg bags, and the manufacturer’s recommended method involves adding approximately 9–10% clean water and mixing until the required workability is achieved.
Benefits of Factory-Produced Ready Mix Concrete
Factory-produced concrete offers several practical advantages for construction projects.
Controlled Material Proportions
Materials are combined according to a defined formulation to help maintain consistency.
Convenient Site Preparation
Pre-blended concrete reduces the need to separately measure multiple dry ingredients at the site.
Multiple Grade Options
Different grades can be selected according to project requirements. SILICO CON is available from M20 to M100.
Easier Material Handling
Bagged dry mix concrete can be stored and transported according to project requirements.
Reduced Material Wastage
Pre-measured and factory-produced formulations can help reduce unnecessary handling and measurement of individual raw materials.
Why Choose Precise Conchem for Ready Mix Concrete?
Precise Conchem Pvt. Ltd. is a Mumbai-based ISO-certified company involved in manufacturing drymix mortars, plasters, concrete, grouts and adhesives.
Its SILICO CON Dry Mix Concrete is a factory-produced concrete mix available in grades from M20 to M100.
The product uses standardized binders, graded sand and aggregates and is designed for different structural and non-structural construction applications.
Precise Conchem’s manufacturing operations use precision-controlled processes with advanced PLC automation. The company states an annual production capacity of 3,00,000 tonnes of drymix mortars and plasters.
SILICO CON Ready Mix Concrete Specifications
Some key product specifications include:
Specification | SILICO CON |
Product Type | Dry Mix Concrete |
Available Grades | M20 to M100 |
Packaging | 50 kg bag |
Appearance | Grey free-flowing |
Water Requirement | Approximately 9–10% |
Initial Setting Time | 250–300 minutes |
Final Setting Time | 450–500 minutes |
Volume | 1 cubic metre = approximately 41 bags |
Product-specific technical information should always be checked before application.
FAQ's
-
What is Ready Mix Concrete?
Ready Mix Concrete is concrete prepared using predetermined proportions of cement, sand, aggregates and other required components for a specified application and grade.
-
What grades of Ready Mix Concrete are available?
Precise Conchem's SILICO CON Dry Mix Concrete is available in grades from M20 to M100.
-
Where can Ready Mix Concrete be used?
Depending on the selected grade and product specifications, it can be used for foundations, columns, beams, slabs, lintels, PCC, DPC and screed flooring.
-
What is Dry Mix Concrete?
Dry Mix Concrete is a factory-prepared dry formulation that is mixed with the recommended quantity of water before application.
-
How do I choose the right Ready Mix Concrete grade?
The required grade should be selected according to the structural design, intended application and project specifications. For structural work, follow the grade specified by the project engineer.
-
Is SILICO CON available in M20 to M100 grades?
Yes. Precise Conchem's SILICO CON Dry Mix Concrete is available from M20 to M100 grades.
Conclusion
Ready Mix Concrete is a widely used construction material that can support different structural and non-structural requirements. Selecting the right product requires consideration of the application, concrete grade, project specifications and recommended preparation method.
Precise Conchem’s SILICO CON Dry Mix Concrete is available from M20 to M100 grades and is specified for applications including columns, beams, lintels, column starters, deck slabs, PCC, DPC and screed flooring.
For construction projects requiring factory-produced concrete, selecting the appropriate Ready Mix Concrete product and grade according to the project’s engineering requirements is essential.