SILICO Con

SILICO Con - Drymix Concrete (M20 to M100 Grade)

Silico Con Concrete Mix is a general-purpose bag Drymix Concrete. It is, dried, pre-blended, factory-produced, prescribed Concrete Mix, incorporating standardised binders, Gujarat natural river graded sand and VSI 10mm down aggregates, polymers and additives. It is used for large as well as small quantity concrete structures where a concrete transit mixer is not able to reach. Silico con is available from M20 to M100 grades of concrete. Silico con meets the requirements of the Greenpro ecolabel and qualifies as a green product.

Features

Consists of a carefully proportioned blend of high quality materials including rounded river run sands and aggregates, portland cement and special concrete admixtures.
The performance and convenience makes it particularly suited for concrete jobs around
Achieves a 28-day compressive strength as per requirements.

Advantages Of Dry Pack Mortar

Used for interior and exterior applications
Uniform and consistent quality
Jobsite mixing of sand and cement is no longer needed
It can be tamped, compacted and filled easily
It guarantees a consistent mix on large jobs
Ensures less wastage and saves time

Storage

Packaging

Areas of Application

Method of Application

The content of the bag can be mechanically mixed in a free-fall mixer for 3–4 minutes or by hand mixed by passing the contents in a tray. Take approximately 9% to 10% of clean water. Slowly add water and mix it continuously until the desired workability is achieved.

This concrete should be used within 45 minutes of water addition.

There is no need to add further additives or admixtures to the material on site as all required plasticizers and workability aids are already included in the mix.

Appearance & Colour	Grey free flowing
Type of Sand	Precisely graded Gujarat Natural brown Sand (Fine sand up to 3mm,VSI 10 mm down)
Water Cement Ratio	8% to 10%
Wet Density (kg/cum)	Upto M50 Grade - 2150 to 2250 Above M50 Grade - 2200 to 2450
Grades Available	M 20 to M 100
Initial Setting Time	250 min to 300 min
Final Setting Time	450 min to 500 min
Chloride % by mass	0.015
Sulphate content % by mass	0.66
Packing	50 Kg per Bag
Volume	1 cum = 2050 kg (41 Bags)

SILICO Con Ingredients

FAQ's

What is the use of silicocon (Dry Mix Concrete) and for which application?

It is dry mix ready to use concrete for small and large concreting works like lintel, chajja, mulian column, column starter, staircase, slabs etc.
Which grades of silicocon (Dry Mix Concrete) are available with us?

M20 to M100
In 1 cum how many bags of silicocon (Dry Mix Concrete) use?

41 bags