- 818-758-4076
- office@legit.com
- 3146 Koontz Lane, California
Silico Bond is a modified polymer emulsion specifically designed for cement-based applications
Excellent Bonding: Enhances the Bonding Strength Between Old Concrete and Fresh Mortar, Ensuring Superior Adhesion to Concrete, Masonry, Brick, Wood, and Metals.
Higher Strengths: Increases Flexural and Impact Strength, Making Structures more durable Compared to Unmodified Mixes.
Lower Permeability: Reduces Water Absorption, Providing Excellent Waterproofing Capabilities.
Bonding Coat: A Bonding Coat between old Concrete & new Mortar/concrete.
Passivating Coat: Anti-Corrosive/passivating treatment to reinforcement and Concrete Surface.
Concrete Repair & Adhesive Mortar by Polymer Modified Mortar: For Repairing Spalled Concrete Floors, Beams, Columns, Slabs, and Foundations.
Wear-Resistant Mortars for Floors: Abrasion-Resistant, Crack-Resistant Polymer Mortars for Industrial.
Repairing Floors & Stairs: Polymer Mortar can be used as a Patch–up to Fill Voids, Loose Pockets, Spalled Edges, Etc.
Crack Sealing: Can be used as a Crack-Filling Compound by Mixing with Cement and Cement Injection Mixing for Grouting Purposes.
Renderings & Coatings: Cement-Based Renderings, Especially in Tanks, Water Treatment Plants, Etc., for Improving the Water Impermeability. Also, for Renderings on the Foundation.
| For Modified Mortars/Concrete | 20% by Weight of the Cement Quantity |
| For Floor Screed | 10% by Weight of the Cement Quantity |
| For Cement Paints | 4 to 5 Ltrs Per Bag of Cement Paints. |
| For lime/white wash | 2 Litres Per Bag of Lime/White Wash. |
Surface Preparation: The Concrete Surfaces and the Reinforcing Steel should be Clean, free from Dust, Dirt, loose Particles, Grease Oil etc. When Repairing, the Base Concrete must be Sound and Firm.
Preparation of Bonding Coat: The Prepared Bases, Such as Concrete, Bricks, Stones Etc. Should Coat Consisting of One Part SILICOBond to One Part Portland Cement, Mixed Homogenously.
Preparation of Polymer Modified Mortar: To Prepare SILICOBond Modified Cement Mortar, Premix thoroughly Solid Components Viz, Portland Cement, Sand in Required Proposition Pour SILICOBond at a Ratio of 20% of Cement Weight with Required Quantity of Water to Mixture, and Mix thoroughly for about 3 to 4 Minutes. Finally add the Water Little by Little, Until the Required Consistency Achieved
Bonding for old to new concrete
